Wheels made in Polyamide 6 HD + glass and natural fibersTemperatures -40°C +150°C | -40°F +302°F

Ditherm LTW description

The LTW series wheels are manufactured in high grade Polyamide and filled with glass fibers plus additional natural fibers, and molded through a new vaacum and material drying process to assure high resistance in temperatures bewteen -40°C and +150°C.

They are available with plain bore and with HQS self lubricating bushes, to allow a good rolling capacity in any condition of use.

The LTW wheels can be fitted into a specific series of brackets for high/low temperatures, which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted in the world of uses in temperatures and bakery / food industry.

Brackets are fully certified and manufactured with food and sanitary grade Stainless Steel in AISI 304 / 316, and are available in both metric and inches standard sizes, and are also available in double-layer galvanized pressed steel.

They are RoHS - REACh compliant, and the permanent lubrication has been approved by FDA-USDA for contact with foods.

A computerized control of the swivel head ball race and assembling tolerances assures a perfect plate rotation without locking point.

Brake system is perfect for low and high temperatures and for inside-outside use and is maintenance free.

Uses

The DITHERM LTW wheels are manufactured to resist to a range of temperatures between -40°C and +150°C.

They features a great resistance to water, humidity and steam, to most solvents, oils, acids and chemicals, featuring good fire-smoke-toxicity properties and are fully certified for use in and food industry, as well as for any application requiring temperature of exercise up to +150°C.

These wheel can work into freezers and chillers in temperature until -40°C and guarantee a high resistance against thermal shock caused by quick increasing or reduction of temperature, in fact this material is permitting to withstand jumps of 190°C in less than 60 seconds, either from cold to hot or reverse.

Ditherm LTW wheels do not mark the floor, can be used in industrial applications and are recommended for use in wet and humid conditions, smoke tunnels, food and canning industry, meat and fish cooking, tannery equipments, salty water and steam.

They guarantee a good resistance against heavy impacts and in presence of uneven floors.

More infos

Ditherm LTW wheels are manufactured through an innovative control of the round and in-axle rotation, to guarantee a perfect rolling in every condition and a 20% higher load capacity, plus an improved surface control which allows this wheel to be a step ahead in its field of application.